苏州海光五金电子有限公司

SuZhou High Ground Hardware Electronics  Co.,Ltd
Product
  • Precision press rivet
  • Precision pull rivet
  • Precision parts
  • Precision standard
  • Electronic connector
Products
chosen：
类型
：
New product (customizable) New products (customizable) Round type carbon steel rivet nut, type: Z; stainless steel round type rivet nut, type: ZS; HFH and HFHS head diameter, head thickness and tooth thickness are greater than FH type riveting screw. They are used for high load and high strength stamping plate. FH carbon steel galvanized riveting screw, FHS stainless steel riveting screw. Seal standoffs are divided into B type and BS type, B type is carbon 。 Model: DSO carbon steel, DSOs stainless steel。 PFHV type press riveting combination screw. Pf21, PF22 pressure riveted panel screws, material: Aluminum Handle + steel sleeve + stainless steel screw + stainless steel spring riveted to 1.0mm and above thin plate, forming free hand screw. PFS2 does not come out of the screw, PFC2 stainless steel does not come out of the screw. Spring screw PF30, PF31, PF32 Material: combination of carbon steel screw, carbon steel press riveting sleeve and aluminum hand screw sleeve; combination of stainless steel screw, stainless steel press riveting sleeve and aluminum hand screw sleeve. PF09 hand screw, PF10 stainless steel hand screw. Chip nut, also known as insert type flush nut or insert nut, model: F; material: stainless steel sus303 by default, and carbon steel products are also available. Seal nuts are divided into B type and BS type, B type is carbon carbon, BS is stainless steel, specific material is b-1215 or 10B21, BSG type-sus303 or 304 hardness: 1. High torque (relative to the round head riveting screw) 2. Convenient assembly, large material tolerance (also relative to the FH type) Materials: carbon steel, stainless steel, stainless steel, aluminum surface: galvanized, nickel, or natural color heat treatment: 1. One is male and female, i.e. one end is male thread and the other end is female thread, which we call sb, (OK, this is just a code) 2. One is double-way, i.e. both ends are internal thread or internal thread are through, which we call SN. Floating nut can be divided into quick cutting steel as Las type and stainless steel AC lac type in terms of material; self-locking nut lac, Las type and non self locking nut AC and as type in terms of whether the nut is self-locking or not. Spring locating pin, locating post, spring locating post: PTL2 PSL2. DSO carbon steel and DSOs stainless steel head are installed in tooth pattern, which are produced by drawing bar or embossed by automatic lathe. TPS locating pin, guide pin. The standard TPS pin material is stainless steel sus303, and the left figure is aluminum. Carbon steel positioning support column Stainless steel positioning support column Classification of press riveted nuts: press riveted nuts can be divided into three types: s, CLS and SP from material: carbon steel press riveted nuts CLS: stainless steel press riveted nuts SP: stainless iron press riveted nuts. So type through-hole stud is the most commonly used type. There are through-hole and blind hole for riveting stud, and through-hole stud is divided into through-hole half thread and through-hole full thread according to the user's requirements. So type through-hole stud is the most commonly used type. There are through-hole and blind hole for riveting stud. BSO blind hole press riveting studs, with blue and white zinc plating on the surface, are generally divided into two types for thin plate press riveting studs. Classification of press riveted nuts: press riveted nuts are divided into three types: s, CLS and SP in terms of materials s: carbon steel press riveted nuts CLS: stainless steel press riveted nuts SP: stainless iron press riveted nuts Customized Three types: single drum core pulling rivet, double drum core pulling rivet and multi drum core pulling rivet. Selection of the appearance of aluminum rivets for lanterns: a variety of head types are also available. Including: round head, flat head, large cap and countersunk head. Drawing rivet material: aluminum, iron, stainless steel surface treatment: untreated (can be customized according to customer demand) head type: countersunk head, round head lock type: internal lock, external lock. It is suitable for the fastening connection between different materials, and the occasion without disassembly. It can be operated on one side of the workpiece, the tool is simple and easy to operate, and the installation efficiency is high. Tthe hole of closed round head blind rivet is completely closed by the nail cap, which can ensure no water leakage and air leakage. The nail cap of closed countersunk head blind rivet is a closed structure like a water cup. SSLF CCF KFE  KFSE CSS CSOS 新产品（可定制） AAM SSMC AA BBNG SSNG AAN AANC AAN AANC AAM AAMC ASP ASF SSF BBF ASMG ASMGC ASMGLF ABMG SSMG BBMG AAH AAHC SSH SSHC BBH BB AS ASC ASLF AA SS AB SSC SSLF BBC PF41-PF42 U UL FEOX FEO FEX AC AS LAS LAC
 
功能
：
Provide threaded stud for PC board. Thread size: #4, #6 "and M3。 Application: the expanding rivet nut is widely used in the fields of automobile, electronics, mechanical equipment, etc. Among them, Z and ZS are more and more widely used as the cold addition process matures. Specification of snail mosquito: # 2 to # 3 / 8 "; M3 to M10. It occupies a small space and has high-strength snail mosquito. It is used for plates with thickness of more than 0.2in/0.76mm. It can be divided into self-locking and non self-locking, snail mosquito specification, # 0 to 1 / 4 "and M2 to M6. Press riveting screw, its description is FH, stainless steel press riveting screw type is FHS, material holding is SUS304. B. BS type sealing standoffs shall be used in the working environment where the bottom end needs to be sealed, sometimes called waterproof studs or waterproof standoffs. Knurled standoffs for adapters, also known as self tightening studs. DSO and DSOs are often installed near the edge of the plate. Small and compact design can be used in limited small space. Two screw lengths. The panel screws (spring screws) can be used to install PCB boards, only occupying a small space. It can meet the needs of various applications. The material is divided into iron and stainless steel. It is easy to load and unload. It can be operated by tools or by hand. Thread specification: Φ 4 to 1 / 4 ", M3 to M6. The design is more compact and reasonable than PF11. Thread specification: Φ 4 to Φ 1 / 4, M3 to M6. assemble it into a whole and extrude the hand screwing part to make it inlaid with the press riveting part through the spring, Form a complete spring panel screw. The panel screws (spring screws) can be used to install PCB boards, only occupying a small space. The riveting sleeve of the hand tight screw has embossing teeth, which are pressed into the chassis or sheet metal hole After pressing into the sheet, it is flat with the sheet or does not protrude out of the surface of the sheet to form internal thread. B. BS type sealing nuts shall be used in the working environment where the bottom end needs to be sealed, sometimes called waterproof studs or waterproof nuts. NFH and NFHS stainless steel hexagon riveting screws are made by automatic turning. BSO blind hole press riveting studs, with blue and white zinc plating on the surface, are generally divided into two types for thin plate press riveting studs: widely used in various circuit board assembly and electronic fields of computer connectors. Floating nut is a kind of combination nut applied to sheet metal or sheet metal. It is round in shape and inlaid with a nut. It can float after combination. Application: the thin plate riveted to the cabinet of the case plays the role of reservation and block after installation. Composition: press riveting locating sleeve, expansion locating pin, spring, attached with material details. Knurled nuts for adapters, also known as self tightening studs. DSO and DSOs are often installed near the edge of the plate. Press riveting on the sheet, the other end plays a role of positioning or guiding. Material: stainless steel sus303, also can provide SKC type positioning support column of other materials, such as carbon steel. In the absence of special instructions, the standard is stainless steel. SKC positioning support column can make P.C. plate or parts slide into place quickly; when taking out, it can be taken out only by sliding it to the side of the plate. Press riveting stud, also known as press riveting nut post or nut post, is mainly used for riveting PCB, circuit board, and various sheet metal, case, cabinet, etc. BSO, BSOS, BSO4, BSOA blind hole rivet nut post, BSO, BSOS,shall be used on the case or circuit board for separation or fixation. Press riveting nut, also known as flower handle nut, is fixed on the thin plate by press riveting. Flowering pop rivets can be used as product anti-counterfeiting firmware: when consumers take out the product from the packaging, they must tear up the outer packaging。 1. High tensile and shear resistance; 2. High temperature resistance; 3. Certain sealing property; 4. Suitable for thin plate materials; 5. Providing strong vibration joints; Working principle: during installation and use, the riveting body is deformed in lantern shape, and the riveting body forms three folding feet. Drawing rivet is a fastener which is often used in industry. Application: bus manufacturing construction, mechanical and electrical, shipbuilding, cabinet, automobile manufacturing, household appliances and other industries. Our company can produce all kinds of specifications and sizes of closed type blind rivets, you can choose according to your own needs; Closed countersunk head pop rivets are widely used in riveting of the connected parts with the requirements of the sealing performance.
 
By name
By time
Price
-
1/9
Slide
Carbon steel rivet nut
Carbon steel rivet nut
类型： Classification of press riveted nuts: press riveted nuts are divided into three types: s, CLS and SP in terms of materials s: carbon steel press riveted nuts CLS: stainless steel press riveted nuts SP: stainless iron press riveted nuts
Blind hole rivet nut post
Blind hole rivet nut post
类型： BSO blind hole press riveting studs, with blue and white zinc plating on the surface, are generally divided into two types for thin plate press riveting studs.
Carbon steel through hole through thread stud
Carbon steel through hole through thread stud
类型： So type through-hole stud is the most commonly used type. There are through-hole and blind hole for riveting stud, and through-hole stud is divided into through-hole half thread and through-hole full thread according to the user's requirements.
Stainless steel through hole standoffs
Stainless steel through hole standoffs
类型： So type through-hole stud is the most commonly used type. There are through-hole and blind hole for riveting stud.
Stainless steel rivet nut
Stainless steel rivet nut
类型： Classification of press riveted nuts: press riveted nuts can be divided into three types: s, CLS and SP from material: carbon steel press riveted nuts CLS: stainless steel press riveted nuts SP: stainless iron press riveted nuts.
ALL  STEEL SEALED TYPE BLIND RIVETS
ALL  STEEL SEALED TYPE BLIND RIVETS
类型： The nail cap of closed countersunk head blind rivet is a closed structure like a water cup.
ALL  STEEL SEALED TYPE ROUND HEAD BLIND RIVETS
ALL  STEEL SEALED TYPE ROUND HEAD BLIND RIVETS
类型： Tthe hole of closed round head blind rivet is completely closed by the nail cap, which can ensure no water leakage and air leakage.
Prev 1 2 3
...
9
Next
Device display
Telephone: 0512 -- 66729441/13776118025 (same as WeChat)
Fax: 0512-66729441
QQ ：249486273
Email address: wnnw@163.com
Address: 2-3 hangqiao Road, hejiajiao village, Wangting Town, Xiangcheng District, Suzhou,
                                                                                                                                         China
Contact us
扫一扫关注二维码加好友
More information
product center
technical data
About Us
contact us
news and trends
ICP 19074075